Gives information about a pointable (finger or tool) detected within a frame from a Leap Motion device.
id
— A unique ID for this pointable.type
— The type of pointable (finger or tool).length
— The length of this pointable, from the hand to the tip (or whatever portion is visible), in Vuo coordinates. If Leap Motion can’t determine the length, this outputs 0.width
— The average width of this pointable (or whatever portion is visible), in Vuo coordinates. If Leap Motion can’t determine the width, this outputs 0.direction
— A unit vector pointing in the same direction as this pointable’s tip.tipPosition
— The position of this pointable’s tip, in Vuo coordinates.stabilizedTipPosition
— The position of this pointable’s tip, smoothed and stabilized by Leap Motion, in Vuo coordinates.tipVelocity
— The rate of change of tipPosition
, in Vuo coordinates per second.touchZone
— The touch zone this pointable is in, relative to Leap Motion’s touch plane.touchDistance
— This pointable’s distance from Leap Motion’s touch plane, ranging from -1 to 1. At 1, the pointable is on the boundary of the “none” and “hovering” touch zones. At 0, the pointable is on the boundary of the “hovering” and “touching” touch zones. At -1, the pointable is fully within the “touching” touch zone.timeVisible
— The time since this pointable was detected by Leap Motion, in seconds.Keywords: controller, finger, motion, tool